Electrical systems – 5000 LPE 240
Parameters
Order number
Date
Valid from serial number
T-code
225553-040
2005-05-11
723984-
660, 661, 662, 497
© BT Europe AB
Service Guide
LWE180, LWE200, LPE200, LPE240
10- 27
10.6.3 Service parameters
•
Connect CAN-key in X41
•
Press S18 and turn S17 to on at the same time.
•
Press S18 until you read P= parameters.
•
You have now choosen P=parameters the symbol “C” on display will
be highlighted to indicate what’s currently shown on display.
•
Scroll to the parameter you want to change or look at by pressing the
L1 up or down.
•
Press S18 ones to get access to the parameter.
•
Set parameter value by pressing L1 up or down.
•
Press S18 ones to confirm change.
•
Turn S17 to off.
You have now completed a parameter change and the next time you
start the truck the new parameter setting will be valid.
NOTE !
Truck handling.
Modifying specific truck parameters will change the driving charac-
teristics of the truck.
Do not change any parameters without the necesarry know-how.
Parameter
Description
Unit
Min
.
Max
.
Step
Std
.
Description
10
PIN-code
0
9999
1
1
Facility for specifying up to 10
PIN codes (10 different drivers).
14
Crawling
speed
-10
10
1
0
The amount of power the mon-
itor should emit when you
reach the first speed sensor
can be specified here.
-10: low speed for the first
speed sensor.
10: high speed for the first
speed sensor
15
Non-config-
urable option
0 to 9
See “Option parameters” on page 29, Servicemanual
16
Configurable
option #1
See “Option parameters” on page 29, Servicemanual
17
Configurable
option #2
18
Configurable
option #3
19
Configurable
option #4
20
Hour meter
option
1
5
1
2
Select hour meter.
A
B
C
D
E
