10- 30
Service Guide
LWE180, LWE200, LPE200, LPE240
© BT Europe AB
Electrical systems – 5000 LPE 240
Parameters
T-code
Valid from serial number
Date
Order number
660, 661, 662, 497
723984-
2005-05-11
225553-040
Changing non-configurable options
•
Ensure the truck is in parameter mode.
The parameter symbol is lit.
•
Select parameter #15 using [L1].
The first set-up of sub-parameters is displayed
The next set-up of sub-parameters is displayed if you continue to acti-
vate the speed control L1. Ensure that only the relevant sub-parame-
ters are displayed.
The value of the sub-parameters is displayed after 1 second.
•
Press the horn button S18.
The parameter symbol flashes.
.
•
Enter the sub-parameter value by repeatedly operating the speed
control L1 in either direction. See Table 6: for more information.
•
Press the S18 horn button once to confirm the new setting.
The parameter symbol is lit (i.e. stops flashing).
•
Switch off the truck by pressing
on the keypad.
