Electrical systems – 5000 LPE 240
Parameters
Order number
Date
Valid from serial number
T-code
225553-040
2005-05-11
723984-
660, 661, 662, 497
© BT Europe AB
Service Guide
LWE180, LWE200, LPE200, LPE240
10- 25
10.6 Parameters
•
Press S18 and turn S17 to on at the same time.
•
Press S18 until you read P= parameters.
•
You have now choosen P=parameters the symbol “C” on display will
be highlighted to indicate what’s currently shown on display.
•
Scroll to the parameter you want to change or look at by pressing the
L1 up or down.
•
Press S18 ones to get access to the parameter.
•
Set parameter value by pressing L1 up or down.
•
Press S18 ones to confirm change.
•
Turn S17 to off.
You have now completed a parameter change and the next time you
start the truck the new parameter setting will be valid.
NOTE !
Truck handling.
Modifying specific truck parameters will change the driving charac-
teristics of the truck.
Do not change any parameters without the necesarry know-how.
10.6.1 Driver parameters
Parameter
Name
Unit
Min
Max
Step
Std
Description
1
Speed, low
Speed
%
10
100
5
100
10:low Speed
100:highest Speed
02
Speed, high
speed
%
10
100
5
100
10:low Speed
100:highest Speed.
03
Acceleration
10
100
5
75
10:low acceleration
100:full acceleration
04
Neutral speed
reduction
5
100
5
80
Defines motor speed
reduction force when
lever goes to neutral
position.
5: low reduction force
100: full reduction force
05
Logout
1min
0
20
1
20
The time it takes for the
truck to switch off when
the keypad is used. The
time counts down from
the moment the last
power-consuming unit
is used.
Value = 0 gives 4 hours.
In steps of 1
A
B
C
D
E