Electrical systems – 5000 LPE 240
Parameters
Order number
Date
Valid from serial number
T-code
225553-040
2005-05-11
723984-
660, 661, 662, 497
© BT Europe AB
Service Guide
LWE180, LWE200, LPE200, LPE240
10- 29
Parameter 17
- Configurable option #2
See “Option parameters” on page 29, Servicemanual
Parameter 18
- Configurable option #3
See “Option parameters” on page 29, Servicemanual
Parameter 19
- Configurable option #4
See “Option parameters” on page 29, Servicemanual
Option parameters
WARNING !
Do not try to change these parameter unless you have specific knowl-
edge of the truck options or truck modifications. This service manual
only covers the truck’s standard equipment. Specially modified
trucks may require you to have access to particular service informa-
tion. Incorrect adjustment of option parameters may result in incor-
rect function.
General
Parameters #15 to #19 have been reserved in the truck control system
for extra options and/or specific product modifications. These parame-
ters are normally configured by the manufacturer on modification or
customisation of the truck. It is recommended that the parameter set-
tings be loaded up from the truck when carrying out any modification. If,
for example, the main logic card [A2] must be replaced, the original
parameter settings can then be simply transferred to the new card,
which ensures that all the special options function correctly.
Parameter #15 Non-configurable options
Up to 16 so-called sub-parameters are stored under parameter #15.
Their status is either ON or OFF and they do not require any other
adjustments. They are therefore called non-configurable options.
