BT Featurephone, Owner'S Handbook Manual

Page: 38 / 53

If a Call Logging Interface Module is installed a printer
or PC may then be connected to your BT Inspiration
system.
The call logging feature allows you to record incoming
and outgoing calls made on the system. Details are
printed as the calls are completed.
If you are connecting a PC or printer to your BT
Inspiration the speed at which data is sent to the PC or
printer can be set at 4800,9600 or 19200BPS. In earlier
systems the speed was set at 4800BPS. It should be a
serial V24/RS232-C and should meet the following
specifications:
Data 8 bits Parity None
Selecting ‘Set V24 baud rate’ in the ‘System’
programming list sets the speed. The default setting is
19200BPS.
The Pin outs from the serial port are:
9 Way D-Type connector Pin Description
Pin 1 DCD Data Carrier Detect Pin
Pin 2 Receive Data Pin
Pin 3 Transmit Data Pin
Pin 4 DTR Data Terminal Ready
Pin 5 Signal Ground
Pin 6 DSR Data Set Ready
Pin 7 RTS Request to send
Pin 8 CTS Clear to send
Pin 9 RI Ring Indicate
Call Logging information
If a Call Logging Interface Module is installed, you
should enable call logging. This feature enables call
logging. No output is programmed on power-up.
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN and select ‘System’
●
Select ‘Call logging’ and choose ‘Call logging on’
●
Press HANDS FREE to finish.
If you do not wish to log certain extensions then:
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN and select ‘Extensions’
●
Select ‘No call logging’
●
The extension menu is presented. Select the
extensions that do not need logging. These
extensions are indicated with a solid diamond
●
Press HANDS FREE to finish.
Calls are printed out in the following format as they are
completed:
1 2 3 4 5 6 7 8 9
O/G 10/12/95 12.00:01 00:00:30 L01 S21 S21 000.00 1234567
O/G 10/12/95 12.00:10 00:01:56 L02 S25 S25 000.00 567890
I/C 10/12/95 12.01:13 00:06:32 L03 S22 S24 000.00
The data shown in this print-out is:
Column Meaning
number
1 Incoming or Outgoing Call
2 Date (Day/Month/Year)
3 Start Time
4 Duration of the Call
5 Line used
6 Initiating Extension
7 Terminating Extension
8 Call Cost Indicator (Unused)
9 Digits Dialled or Received via CLI or CDS
38
Using the Call Logging Interface Module