BT Featurephone, Owner'S Handbook Manual

Page: 41 / 53

Line key light
When a call is placed on system hold you can decide if the
line light is flashing or steady on all other Featurephones.
The default setting is ‘Light flashing on hold’.
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN and select ‘System’
●
Select ‘Line key light’
●
Chose either ‘Light flashing on hold’ or ‘Light steady
on hold’
●
Press HANDSFREE to finish programming
No trunk to trunk calls
This allows you to prohibit extensions from activating
external divert, external transfer and external
conference
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN and select ‘Extensions’
●
Select ‘No trunk-to-trunk calls’
●
Enter the extensions to be denied this feature.
Those extensions denied the feature will be
indicated by a solid diamond
●
Press HANDS FREE to finish programming.
Outgoing call line priority
On systems programmed with a mixture of ISDN and
PSTN (Analogue lines) an option is provided so that
either the ISDN or PSTN lines will always be selected
first when an external call is being made. The default
operation is that the lines are selected cyclically, no
priority.
●
From the programming position, press the phone
set up key P and select ‘System programming’
●
Enter the PIN and select ‘Lines’
●
Select ‘’Outgoing Line priority’’
●
Chose either “No priority”, “ISDN priority” or “PSTN
priority”
●
Press HANDS FREE to finish programming.
NOTE: This feature does not override any restrictions
on line selection programmed for the extension.
Alternative routing takes precedence over outgoing line
priority.
Outgoing groups
Lines can be programmed into groups and lines in a group
can be selected by dialling the group access code. In
default all lines are in group one and the dialling code to
access group one is 9.
Lines .in groups 2, 3 and 4 are accessed by dialling 81, 82
and 83 respectively.
●
From the programming position, press the phone
set up key
P
and select ‘System programming’.
●
Enter the PIN and select ‘Lines’.
●
Select ‘Outgoing groups’.
●
Select the Group you wish to set up. Up to four
Groups can be set up, each with a corresponding
access code – 0, 81, 82 and 83.
●
Select the Lines to be in the Group.
●
Press HANDSFREE to finish programming.
Note:
Lines can be in one Outgoing Group only. Selecting a Line
to be a member of a Group automatically removes it from
all other Groups.
PABX group
Lines connected to a PABX can be programmed together
in an outgoing group, see Outgoing groups. Outgoing
groups can be specified as PABX group.
From the programming position, press the phone set up
key P and select ‘System Programming’
●
Enter PIN and select ‘Lines’.
●
Select ‘PABX group’.
●
Select which Outgoing Group you wish to use. You
are then presented with another menu with which to
programme the parent PABX Access digits.
●
Select ‘Set PABX status’ to set or clear the selected
Outgoing as a PABX group. A confirmation prompt
appears momentarily on the top line of the Display
●
Select ‘Access digits’. Enter the ‘Access digits’ for
an external line on the parent PABX and select
‘Confirm’.
●
Select Ext. num length’. Enter the number of digits
in the extension numbers on the parent PABX.
●
Press the Hands-free key to finish programming.
Port swapping
If an extension position becomes faulty you can move
the extension, and all its programming, to a new position
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN and select ‘Extensions’
●
Select the ‘Port Swapping’ option
●
Select the first extension from the extension list
●
Select the second extension from the extension list
●
Press HANDS FREE to finish programming.
41