BT Featurephone, Owner'S Handbook Manual

Page: 43 / 53

43
Administration programming
Programming via a Featurephone
The BT Inspiration can be programmed from an
extension position equipped with a Featurephone. In
default the programming position is Extension 20.
Basic programming procedure
●
From the programming position, press the phone
set up key
P
and select ‘System programming’
●
Enter the PIN (1111 in default).
A menu with ‘System’, ‘Extensions’ and ‘Lines’ is
presented.
Under ‘System’ you will find all the programming
parameters which affect the system as a whole.
Under ‘Extensions’ you will find all the programming
parameters for individual extensions.
Under ‘Lines’ all you will find all the programming
parameters which affect the lines.
When ‘System’ is selected the following options are
available
Feature Default
Time and date 12:00 01.01.1999
Change password 1111 A new 4 digit password can
be entered.1
Programming position Extension 20
System directory
None See page 12 for
programmed description on entering
numbers and names
Night service Not
• Automatic on and programmed
off times
• Weekend service
Music on hold
Tone
• Music
• Tone
• Silence
Line light key
Flashing When a call is placed on
system hold you can decide
if the Line light is flashing or
steady on all other feature
phones.
Change greeting Not
programmed
Call logging Not
programmed
Timers.
• Recall on hold
30 seconds
• Recall on Transfer 30 seconds
• Divert on no answer 11 seconds
• Courtesy answer 30 seconds
• Open the door 5 seconds
• Door Intercom 30 seconds
ring time
• Call Park 180 seconds
• Ring Back time 30 seconds
• Answer machine 10 seconds
Door Intercom Not
Programmed
P A Amplifier Not
programmed
CLI store Stores
unanswered
calls only
Class codes Not Table 5 is a table of codes
• Table 5 programmed which when combined with
• Table 6 classes 2 and 3 these codes
can be dialled.
Table 6 is a Table of codes
which when associated with
other classes these codes
are restricted.
Reset options WARNING! The use of these
• Reset options will at least cut off
• Reset to default all existing calls and with the
‘Reset to default’ lose all
existing programming
Set V24 Band 19200