Associating Names and extension numbers with CDS
numbers
●
Up to 30 names, each of a maximum of 10 characters
(including spaces), may be associated with telephone
numbers. When a number with an associated name is
received, the name rather than the number will be
displayed
●
A further table is available in this field, whereby an
extension number may be added. In the case of a
number being identified as associated with a particular
extension, the call rings the programmed extension
●
If the extension is busy the call rings in as normal in
the case of standard lines and returns a busy
indication in the case of ISDN 2 lines.
●
CLI names allocation takes precidence over Auto
Attendant.
To program the names to be associated with CDS
numbers
●
From the programming position, press the phone set
up key
P
and select ‘System programming’
●
Enter the PIN and select ‘Lines’
●
Select ‘Program CLI number’
●
Select an index number, 01-30, and enter the number
●
Select ‘Program CLI extn’ and enter the extension if
the number is to call the extension
●
Select ‘Program CLI name, and enter the name to be
associated with the number
●
Press HANDS FREE to finish programming.
25
Summary of Contents for Featurephone
Page 53: ...53...
