Service and maintenance of machine
Sherpa 1201 / 1401
97
8.16.2
Mixer gearbox
1. Check the oil level in the mixer gearbox via
the lateral compensating reservoir (1).
The oil level must be visible between the
two filling level markings (2).
2. Top up gear lubricant oil if necessary after
removal of the vent screw (3).
Fig. 125
8.17
Check / Adjust discharge door distance
1. Close the discharge door.
2. Secure the machine against accidental
starting and rolling.
3. Measure the distance X between the
discharge door and the mixing container.
The distance must be approx. 5 mm.
4. Adjust the distance X if necessary:
4.1 Unscrew the screws (1) at the L straps
(2).
4.2 Move the L straps (2) in the oblong
holes such that the distance X is
approx. 5 mm.
4.3 Retighten the screws (1).
Fig. 126
Summary of Contents for Strautmann Sherpa 1201
