BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 111 / 133

Service and maintenance of machine
Sherpa 1201 / 1401 111

Regularly check the screwed connections for tightness.

Always replace screws and nuts by parts of the same quality.

Tighten counter nuts with plastic insert and bordered steel
counter nuts at approx. 50% of the “dry” value specified in the
table.

Tighten gear or crown nuts at full torque.

Shear bolts are designed such that they shear off (break) at a
certain stress. Only use bolts of equal quality when replacing
shear bolts.
8.29 Adjust travelling height of hydraulic chassis
Optional extra
The rear chassis can be best lowered with the machine charged.
If the machine is empty, press the pick-up arm down to the ground
by means of the joystick to lower the rear chassis.
WARNING Risk of injury due to movements of the machine or its working
tools!
Secure the machine against accidental starting, rolling and actuation!
1. Pull the lever of the three-way cock (1) out
and swivel it, until it engages,
●
to the upper position (2) to preselect
the front chassis,
●
to the lower position (3) to preselect
the rear chassis.
2. Start the machine.
Fig. 150