BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 98 / 133

Service and maintenance of machine
98 Sherpa 1201 / 1401
8.18 Swivel / Replace cutting knives
Shop work
Some cutting knives can be
mounted in 2 positions:
(1) Retracted (factory setting):
●
Requires less driving
power.
●
Better undoing of bales.
(2) Extended:
●
Requires higher driving
power.
●
Supports discharge of
highly-structured
mixtures at the
discharge opening.
●
An extended upper
cutting knife can better
pick up bale
components and re-
include them in the
intensive mixing
process.
Fig. 127
DANGER Risk of most serious injuries or even death due to movements
of the machine or its working tools!
Secure the machine against accidental starting, rolling and actuation!
DANGER With magnetic system (optional extra): Danger to life to people
with pacemakers and implanted defibrillators due to magnetic
fields!
Keep sufficient distance to the magnets at the top and bottom at the
mixing auger(s) if you wear a pacemaker or implanted defibrillator.
WARNING Risk of injury due to falling when climbing over the top edge of
the mixing container without permission!
Only enter the mixing container through a discharge opening with
the dosage gate completely lifted and secured against accidental
lowering!
WARNING Risk of injury due to sharp cutting knives!
Rotate the mixing auger(s) such that the cutting knives are not
directly pointed at the discharge opening through which you intend
to enter the mixing container!
Wear cut-resistant protective gloves!
Cover the cutting knives by means of an edge protector!