Service and maintenance of machine
Sherpa 1201 / 1401
91
8.10
Check / Top up coolant level
It is imperative to observe the included diesel engine operating
instructions.
WARNING
Risk of scalds or burns due to hot coolant squirting out!
Open the cap of the coolant compensating reservoir only after the
diesel engine has cooled down.
Use a thick cloth to generously cover the cap before opening.
Wear appropriate protective clothing (protective goggles, protective
gloves).
1.
Park the machine on level, horizontal
ground.
2.
Turn the diesel engine off and let it cool
down.
3.
Open the radiator door (1).
Close the cabin window before
opening the radiator door, in
order to avoid damage to the
glass pane!
4.
Check the coolant level at the coolant
compensating reservoir (2).
Top up coolant if the coolant level is
below the middle line (3).
Fig. 111
5.
Use a thick cloth to generously cover the
cap (4) of the coolant compensating
reservoir and open the cap.
6.
Top up coolant through the filler neck until
the coolant compensating reservoir is
filled up to ¾ of its volume.
7.
Firmly screw the cap on again.
8.
Close the radiator door.
Fig. 112
8.11
Check / Top up hydraulic oil level
Best check the hydraulic oil level at an hydraulic oil temperature of
about 20°C.
As hydraulic oil expands when heated, topping-up of an excessive
amount of hydraulic oil is thus prevented.
Summary of Contents for Strautmann Sherpa 1201
