BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 79 / 133

Service and maintenance of machine
Sherpa 1201 / 1401 79
8 Service and maintenance of machine
Regular and proper service and maintenance:

will keep your machine ready for use for a long time and avoid early wear,

will reduce downtimes and repairs,

is a precondition for our warranty provisions.

When carrying out service and maintenance work on the
machine, additionally observe the information included in the
following chapters:

"
Operator’s obligation
", page 23,

" Qualification of operator ", page 24,

" Basic safety instructions ", page 26,

" Warning and instruction signs ", page 33.
Observance of these chapters serves your safety.

Immediately replace worn or damaged components.

Only use original spare parts.

Observe environmental protection measures when carrying out
service and maintenance work on the machine.

Observe legal provisions when disposing of operating media
such as oils and greases. These legal provisions also apply to
parts having come into contact with those operating media.

In case of doubt, the maintenance intervals specified in the
included sub-supplier documentation shall prevail.

As a basic principle, disconnect all electrical/electronic plug-in
connections before carrying out welding work on the machine!

It is necessary to take protective measures such as covering
power supply lines, hydraulic hose pipes, brake and feed lines or
removal of such lines at particularly critical spots:

when carrying out welding, drilling and grinding work,

when carrying out work by means of cutoff wheels in the
vicinity of these pipes and lines.

Check brake lines, compressed air pipes and hydraulic hose
pipes with special care for visible defects.

Special know-how is required for carrying out testing and
maintenance work. This know-how is not imparted by these
operating instructions.

The maintenance intervals depend on the frequency of use of
your machine. The maintenance plan has been tailored to
medium axle loads and stress exerted on the brakes.
In case of higher loads and amount of stress, maintenance work
must be carried out at respectively shorter intervals. This shall in
particular apply to the brakes and chassis.

Modifications to the maintenance instructions shall be reserved!