BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 71 / 133

Use of machine
Sherpa 1201 / 1401 71
7 Use of machine
7.1 Fill fodder mixing wagon
7.1.1 Recommended filling order
1. Pick-up highly-structured fodder components (hay, straw etc.) (with the mixing auger/s switched
on).
Have them possibly mixed for some time before filling in the next component.
2. Pick up concentrated feed, grain feed etc.
3. Fill in mineral feed.
4. Pick up grass silage.
5. Pick up maize silage, grain silage.
6. Pick up fodder components with a high proportion of water, e.g. draff, potato pulp or beet chips.
7. Pick up liquid components, e.g. liquid yeast, molasses.
7.1.2 Pick up silage from the bunker silo

Do not let the milling drum/the Fast-Cut cutting knives come into
contact with stationary elements such as e.g. silo walls or the
floor.

Ensure that no foreign objects such as e.g. stones lying on the
floor, metal objects or parts of the silo cover (tyres) get into the
milling drum/between the Fast-Cut cutting knives.

Apply load to the milling drum/cutting unit as equally as possible
over the entire width.

Observe the maximum load of the machine and the filling order of
the individual fodder components to prevent a build-up of
overload (e.g. at the counter-cutters). Overload may damage the
power train and bend the cutting knives of the mixing auger.
Machine with milling drum
WARNING Risk of injuries due to the rotating pick-up milling cutter, the
opening and closing milling drum protection, the lifting and
lowering cutter arm, the advancing and reversing machine!
Make sure that people and animals leave the hazardous area of the
machine.