
Service and maintenance of machine
Sherpa 1201 / 1401
87
Cleaning by means of pressure washer / steam blaster
It is absolutely imperative to observe the following when using a
pressure washer / steam blaster for cleaning.
The maximum admissible injection pressure is 80 bar.
The maximum admissible water temperature is 60°C.
Do not clean electrical components such as control set, weighing
rods, distributor boxes, weighing computer etc.
Do not clean chromium-plated components.
Never aim the cleaning nozzle jet of the pressure washer / steam
blaster:
directly at lubrication points and bearings,
directly at hydraulic components.
directly at rubber gaskets.
Always keep a minimum nozzle distance of 300 mm between the
cleaning nozzle and the machine.
Never aim the cleaning nozzle jet at the machine parts at right
angles. The nozzle spray angle must at least be 25°.
Do not use any chemical additives.
Observe the safety instructions when handling pressure
washers.
8.7
Lubrication of machine
Remove the dirt from the lubrication nipples before carrying out
lubrication work.
Do not exceed the maximum lubrication pressure of 250 bar when
using high-pressure grease guns! Damage to bearings, seals etc.
may occur if the grease gun used is not equipped with a protective
device.
Exclusively use lithium-saponified multi-purpose grease.
Use environmentally friendly, biodegradable oils and greases where
lubricants may penetrate the fodder or the ground.
Summary of Contents for Strautmann Sherpa 1201
