BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 74 / 133

Use of machine
74 Sherpa 1201 / 1401
8. Release the enabling button (1), keep hold
of the joystick to the left (6) and move it
forward (5):
→
The pick-up arm lowers, while the
silage is cut out of the silo stack and
conveyed into the mixing container.
9. Lower the drive speed of the elevator
conveyor by means of the manual throttle
lever if necessary (e.g. if silage is thrown
over the mixing container).
10. Observe also the weighing device display
during picking-up.
Fig. 85 Fig. 86
11. Reverse conveyor drum and elevator
conveyor if necessary, e.g. if
●
the conveyor drum is clogged due to
overload and the warning lamp
"Conveyor drum stop" (Fig. 87)
lights up.
●
too much silage has been picked up
which should not be conveyed into
the mixing container.
To reverse, move the joystick to the right
(Fig. 84/7) and keep hold of it with the
enabling button pressed (Fig. 84/1).
→
Elevator conveyor and conveyor
drum run in the reverse direction.
The silage is thrown out to the front.
12. Finish picking-up:
12.1 Release the joystick such that it
returns to its neutral position.
→
Cutting knives, conveyor drum and
elevator conveyor stop.
12.2 Deactivate the cutting knives
(Fig. 86).
Fig. 87
7.1.3 Pick up bales, bulk materials and other items
Pick up bales
Remove strings, nets or foils before picking up bales.