BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 84 / 133

Service and maintenance of machine
84 Sherpa 1201 / 1401
8.4 Service and maintenance plan - Overview
► See also chapter "Lubrication plan", page 88!
It is imperative to observe the included diesel engine operating
instructions.
For maintenance work to be exclusively carried out by an authorised
workshop, please refer to the inspection booklet.
The maintenance intervals specified in the included sub-supplier
documentation shall prevail.
Before first start-up and after longer downtimes
Check:
●
the machine for visible defects.
●
all functions of the machine, including the engine function.
●
all liquid filling-up points for tightness.
●
all wheel nuts for tightness, retighten if necessary.
●
all screwed connections of the chassis for firm seat.
●
the hydraulic hoses and screwed connections for tightness and firm seat.
●
the oil level of all gearboxes and axles.
●
the tyre pressure.
Completely lubricate the machine.
After first startup
Check the screws of the holding-down plates of the Fast-Cut cutting knives (optional extra) for
tightness (after the first 2 service hours, also after change of cutting knives); retighten the screws if
necessary.
Daily
Check:
●
the machine for visible defects.
●
all functions of the machine, including the engine function.
●
the service brake and the parking brake for proper functioning.
●
the lighting system, horn (reversing signal) for proper functioning.
●
the milling drum for imbalance, the milling blades for good fixture, position (especially the outer
milling blades), wear, breakage and loss.
●
the Fast-Cut cutting knives (optional extra) for proper contact with the counter-cutter; remove
silage residues from the space between if necessary.
●
the cutting knives of the mixing auger for good fixture, wear, breakage and fodder piling up.
●
the strippers of the elevator conveyor.
●
all conveyor belts for conveyor tension, conveyor run and damage (fissures, raised corners).