BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 105 / 133

Service and maintenance of machine
Sherpa 1201 / 1401 105
5.2 Replace the milling blades by new
ones or exchange the milling blades
on the left-hand and right-hand side of
the pick-up milling cutter.
5.3 Tighten all screwed connections of the
milling blades.
6. Close the protective device of the pick-up
milling cutter.
8.25 Cutting unit
Optional extra
WARNING Risk of injury due to cuts or amputation!
Wear cut-proof protective gloves when carrying out work on the
cutting knives!
Only carry out work on the cutting knives after they have come to a
standstill!
Secure the machine against accidental starting!
8.25.1 Check cutting unit
After the first 2 service hours (also after
replacement of cutting knives):
Check the screws (5) of the holding-down plates
for tightness.
Retighten the screws at 25 Nm if necessary.
Fig. 139
Check whether the cutting knives (3) properly fit
the counter-blade (4)
every day .
Remove silage residues having moved between
the cutting knives and counter-blades.
Fig. 140