BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 82 / 133

Service and maintenance of machine
82 Sherpa 1201 / 1401
8.2 Enter the mixing container
Shop work
WARNING Risk of injury due to falling when climbing over the top edge of
the mixing container without permission!
Only enter the mixing container through a discharge opening with
the dosage gate completely lifted and secured against accidental
lowering!
WARNING Risk of injury due to slipping, stumbling or falling!
Only carry out work in an empty mixing container which is as clean
and dry as possible!
Wear non-slip safety footwear!
Pay particular attention to the scraper(s) of the mixing auger(s) near
the bottom!
WARNING Risk of injury due to sharp cutting knives!
Rotate the mixing auger(s) such that the cutting knives are not
directly pointed at the discharge opening through which you intend
to enter the mixing container!
Wear cut-resistant protective gloves!
Cover the cutting knives by means of an edge protector!
DANGER With magnetic system (optional extra): Danger to life to people
with pacemakers and implanted defibrillators due to magnetic
fields!
Keep sufficient distance to the magnets at the top and bottom at the
mixing auger(s) if you wear a pacemaker or implanted defibrillator.
1. Rotate the mixing auger(s) such that the cutting knives are not directly pointed at the discharge
opening through which you intend to enter the mixing container.
2. Completely open the discharge door of the discharge opening und secure it against accidental
lowering.
3. Switch the parking brake on.
4. Turn the diesel engine off.
5. Pull the ignition key out.
6. Enter the mixing container through the open discharge opening.
7. Cover the cutting knives by means of the edge protector.
8. After completion of work in the mixing container: Clean the mixing container and remove loose
components, tools etc. from the mixing container.
9. Leave the mixing container through the open discharge opening.