BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 106 / 133

Service and maintenance of machine
106 Sherpa 1201 / 1401
Check the fastening screws (2) of the cutting unit
guard for tightness
every 50 service hours.
Retighten the screws if necessary.
Fig. 141
Regularly check the blades for wear.
Replace the cutting knife if the blade (1) is worn
or teeth have broken out.
Fig. 142
Regularly check the cutting knives for
deformation.
A serviceable cutting knife (1) has a slightly
concave cross-section (distance X = 0.2 mm).
Readjust or replace the cutting knife if it is bent
(2).
Fig. 143
Regularly check the 6 mm slide plates for wear.
Slide plates which are only worn on the
underside (2) can be turned over and reinstalled.
Replace slide plates which are worn on both
sides.
Fig. 144