BSL Strautmann Sherpa 1201, Translation Of The Original Operating Instructions

Page: 48 / 133

Commissioning
48 Sherpa 1201 / 1401
4.13 Ventilate / Heat driver's cabin
Ventilate / Heat cabin compartment
1. Turn the fan regulator as required (1) to
●
level 1 = low,
●
level 2 = moderate,
●
level 3 = strong.
2. Open the slots of the ventilation nozzles
(2) installed in the cabin ceiling and in the
footwell.
3. Use the heating controller (3) to set the
desired heating temperature.
Fig. 41
4.14 Remove / Fix radio remote control
Optional extra
The values of the added ingredients can be read
from the radio remote control display even
outside the cabin.
Angle the radio remote control before
its removal and insertion into the
holder, in order to prevent the contacts
from being damaged.
Remove radio remote control
1. Bend the bottom end of the radio remote
control (1) in direction "B".
2. Now move the radio remote control up.

The radio remote control is now detached
from the holder.
Fix radio remote control
1. Bend the bottom end of the radio remote
control (1) in direction "B".
2. Now move the radio remote control down
into the guide rail of the holder.
3. The radio remote control can be bent in
direction "A" as soon as it has engaged.

The radio remote control has been fixed.
Fig. 42