Commissioning
Sherpa 1201 / 1401
49
4.15
Extend / Retract counter-cutters
Mechanical counter-cutters:
1.
Remove the locking bolt (2).
2.
Extend or retract the counter-cutter (1) into
or out of the mixing container and secure it
in the desired position by means of the
locking bolt.
3.
Use the clip connector to secure the
locking bolt against slipping out.
Fig. 43
Hydraulic counter-cutters (optional
extra):
1.
Extend or retract the counter-cutters
(1) into or out of the mixing container
by means of the key button in the
control console.
Always extend or retract the
hydraulic counter-cutters
completely!
It may take varying lengths of
time until all counter-cutters
have been completely
extended or retracted.
2.
In order to change the position for the
limit stop when extending:
2.1
Retract the counter-cutters (1)
completely out of the mixing
container by means of the key
button in the control console.
2.2
Remove the screw (2) and
screw it together with the thrust
washers (3) in the desired
position for the limit stop.
Fig. 44
Summary of Contents for Strautmann Sherpa 1201
