Bruker minispec LF Series, User Manual

Page: 15 / 72

Transport, Packaging and Storage
E164809_2_002 15 / 72
3 Transport, Packaging and
Storage
Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by Bruker Service or personnel authorized by Bruker.
Damage due to servicing that is not authorized by Bruker is not covered by your warranty.
3.1 Symbols on the Packaging
The following symbols are affixed to the packaging material. Always observe the symbols
during transport and handling.
Top The arrow tips on the sign mark the top of the
package. They must always point upwards;
otherwise the content may be damaged.
Fragile Marks packages with fragile or sensitive
contents.
Handle the package with care; do not allow the
package to fall and do not allow it to be
impacted.
Protect Against Moisture Protect packages against moisture and keep
dry.
Attach Here Lifting gear (lifting chain, lifting strap) must
only be attached to points bearing this symbol.
Center of Gravity Marks the center of gravity of packages.
Note the location of the center of gravity when
lifting and transporting.
Weight, Attached Load Indicates the weight of packages.
Handle the marked package in accordance
with its weight.
Permitted Stacking Load Indicates packages which are partially
stackable.
Do not exceed the maximum load-bearing
capacity specified on the symbol in order to
avoid damaging or destroying the content.