Bruker minispec LF Series, User Manual

Page: 60 / 72

Dismantling and Disposal
60 / 72 E164809_2_002
The WEEE register number can be found on the product label of the equipment. If you need
further information on the disposal of equipment or collection and recovery programs
available, contact your local Bruker BioSpin sales representative. Local authorities or
professional waste management companies may also provide information on specific waste
disposal services available in your area.
Disposal - End of Life (EoL) information
After the lifespan of an electrical and electronic product, Bruker BioSpin takes responsibility
for final disassembly and correct disposal in accordance with the European directive WEEE
2012/19/EU.
Bruker BioSpin offers to take back the equipment (only for deliveries after 23.03.2006) after
termination of use at the customer site upon request by the customer. Additional costs for
dismantling and transport service will apply!
Only 100% pre-decontaminated equipment can and will be accepted by Bruker BioSpin. A
release document for decontamination (Equipment Clearance Form) can be requested from
your nearest Bruker BioSpin contact site, following the Return Material Acceptance (RMA)
process when repairs, going back to Bruker sites, are requested.
In compliance with WEEE II directive: 2012/19/EU
11.3 Disposal in USA and Other (non-EU) Countries
Disposal of these materials may be regulated due to environmental considerations. For
disposal or recycling information, please contact our local office or your local authorities, or in
the U.S.A., contact the Electronics Industry Alliance web site at
www.eiae.org .