Bruker minispec LF Series, User Manual

Page: 33 / 72

Operation
E164809_2_002 33 / 72
The Instrument Settings Command
Minispec instrument settings are instrument dependent values such as the pulse lengths and
the magnetic field at NMR resonance. Instrument settings differ from minispec to minispec,
and must be tuned the first time a minispec is connected. You can use this command to
change the settings of the instrument with manual input.
Figure 6.7: The minispec Settings Table
You can change the listed settings by manual input or with the Update Settings command.
Grayed entries are disabled.
Shortcut: Standard Tool Bar:
The settings that can be changed are shown in the figure above. If the minispec Settings
are disabled on a connected minispec, customize your minispec software (through the
Welcome Box) to access the calibration parameters.
The Advanced button in the settings table allows access to a list of instrument setting table
names. The user may select the appropriate settings table to be used by the instrument,
define custom names for the settings tables with the help of the
Customize button (e.g.
settings table name could be set to the probe name), and save the current entries under a
new name.
Entries in the settings table about SFC are only relevant in the case of the SFC-Analyzer. If
the SFC-item in the upper middle part of the settings table is marked, then the
Update
Settings and the Daily Check routines will include steps to determine the SFC-specific
values. The factors (K, F, and O) and the sampling windows for a solid fat content analysis
are definable via the
SFC-Settings button.