Bruker minispec LF Series, User Manual

Page: 10 / 72

Safety
10 / 72 E164809_2_002
2.4 General Workplace Dangers
2.4.1 Lifting Safety
The standard magnet unit may weigh up to 150 kg depending on the type of analyzer, to
ensure safety the follow safety instructions must be followed:
kg
CAUTION
Risk of injury from lifting heavy objects.
The unit is very heavy and may lead to injury when lifting.
u Do not attempt to lift the unit over the edge of the carton, remove the carton first.
u
Do not attempt to lift the unit on your own or without necessary precaution against
injury.
u
Use a hoist if available.
2.4.2 Safety When Working with Glassware
WARNING
Danger of injury from glassware or ceramics breakage!
Broken glassware or ceramics may cause minor injuries or material damage, but may also
result in a life threatening situation if hazardous substances are used.
u
If glassware or ceramics breaks, refer to the corresponding precautions and cleaning/
disinfection instructions.
u
Wear protective equipment.
u
Perform all tasks with the glassware or ceramics carefully.
u Before carrying out any maintenance work, remove the samples and use dummy
samples if necessary.
u Strictly observe the correct sample adjustment, i.e. the maximum sample height.
u
Always transport the glassware or ceramics with the cover, if applicable. Never turn the
glassware or ceramics upside down or on it’s side.
u
The laboratory supervisor is responsible for:
ð Establishing and enforcing standard sample handling and cleaning procedures.
ð Establishing and enforcing the use of protective clothing and equipment.
ð Training laboratory personnel.
ð
Preparing an emergency plan.