Operation
24 / 72
E164809_2_002
The ‘wake-up’ application can also be selected for future program start-up. When the user
has finished with the selections, the
OK
button is used to start the software.
To change the configuration, press the
Setup
button. The configuration is protected by a
simple log-in mechanism.
• First log-in: Press the
Setup
button. Enter and confirm a password. The password will be
saved automatically and
you will need it for every subsequent log-in. Handle the
password carefully!
Only users who have permission to make changes to calibrations
and software configurations should have knowledge of the password. If password
protection is not desired, simply click
OK
or <
Enter
> without entering a password when
the password entry box appears and confirm this in the following box.
• Later log-in: Press the
Setup
button and enter the password or click twice on
OK
if
password protection is not used.
6.2.2.1
Selecting Applications and Connections
If you click
Setup
in the
Welcome Box
you will open the
configuration level
of the welcome
dialogue. This password procedure is described in the section above. Up to 20 applications
can be selected simultaneously for every analyzer type (except for the SFC-Analyzer where
only one application is allowed) to be loaded at the startup. To add applications to the list use
Browse...
to access a file selector box or use
Delete
to remove applications from the list.
To choose another minispec, use the
Select
button in the
Select minispec to connect to
field.
6.2.2.2
Changing Analyser Type and Calibration Permission
Use the
Customize
button in the
configuration level
(see Selecting Applications and
Connections) to open a dialog box. In this window the analyzer type and the calibration
permission can be selected by checking the corresponding select box with a mouse click.
Two options, RELAXATION TIME and the NMR analyzer, require a license number to
operate. The number will be requested while connecting to the minispec (after you click the
OK
button in the
Welcome Box
) when one of these options is selected. If ordered with the
system, this license number is issued on the first page of this booklet, labeled as the ExpSpel
license number.
6.2.3
The minispec Standard Windows
The minispec user interface provides access to all menu functions, parameters, application
programs, NMR signal display, and measurement results. In order to provide ready access to
commonly needed views of the software operations, the screen is divided into different parts.
To facilitate measurement handling and provide easy access to command commands, icon
bars have been integrated into the user interface, and windows are available for the control of
the measured signal (
Signal Window
) and the results (
Result Window, Statistics Box
).
Summary of Contents for minispec LF Series
