Bruker BMPC/2, Technical Manual

Page: 104 / 136

104 Z31823_00_05
Configuration (administrator)
12.3.3 Monitoring System
12.3.3.1 Sensor Channels
In this settings window you can configure the effect of the individual sensor channels on
the alarms, as well as the representation of the channels in the various display options.
Figure 12.17Tools - Options - Sensor Channels
• Channel Active: When this option is selected, the data for this channel is updated
continuously. When the option is not selected the channel information in the present
value display is not actualized.
• Alarm Trigger: When this option is selected, the telephone-supported alert will be
started when an alarm situation occurs (e.g. When a limit value is exceeded).
• Switch Alarm Trigger: When this option is selected the telephone alerting will be
deactivated during the duration of the He-Fill cycle.
In the Field Display Setup you can adjust the position of the selected channel in the
Present Value Display, Data Log Display, Jumbo Display as well as the Status/Alarm fax.
1
Selected Sensor Channel
5
Row in Present Value Display
2
Channel Active
6
Column in Data Log Display
3
Enable/Disable Telephone Alaram
7
Row in Jumbo Display
4
Alarm disabled during He-Refill
8
Column in Alarm/Call Fax
1
2
3
4
5
6 7 8