Bruker BMPC/2, Technical Manual

Page: 54 / 136

54 Z31823_00_05
Hardware Overview
8.3 BMPC/2 Wiring Box
The BMPC/2 Wiring Box (P/N H13030) is mounted on a flange in the upper region of the
magnet. It is designed as a CAN BUS slave and connects the BMPC/2 to the tempera-
ture sensors T1 and T2 and to the heater resistors for H1 and H2. The wiring box also
contains a small LC display where the main magnet parameters and system messages
can be viewed.
Figure 8.5 BMPC/2 Wiring Box
4 x 20 Character Display
Wiring Box
Connect cable HZ13811
to this connector and
Wiring Box
Heater H1 connector
Connect cable HZ13813
to this connector and
T1, T2, H2 connector
Wiring Box
Power supply connector
Connect cable HZ13592
Wiring Box
CAN bus connector
Connect cable 87496
to this connector
Wiring Box
Can Bus connector
Connect cable 87497
to this connector
to BMPC/2 control unit
to P1 sensor
Wiring Box H13030
to flange 2 St. A
to flange 1 St. A
to BMPC/2 control uni
to this connector