Bruker BMPC/2, Technical Manual

Page: 115 / 136

115 Z31823_00_05
Configuration (administrator)
In this window you can modify the group alarm settings.
•
Internal Group: When this box is checked the members of the internal contact list
are called when an alarm occurs. You can also specify how many times the call will
be repeated if no one responds.
• External Group: When this box is checked the members of the external contact list
are called if the internal group does not acknowledge the alarm. The call will be
repeated until a member of the group responds.
• Fax Group: After the internal and/or external group is contacted a fax is sent to one
or more of the fax groups if the boxes are checked. When an alarm fax is sent to an
external receiver it is always meaningful to also send a confirmation fax to the same
receiver so they are informed about the situation.
• E-mail Group: When this box is checked e-mails are sent to the members of the
group after the fax group has been notified.
• Repeat Alarm Sequence: Here you can enter an interval for how long the system
should wait before it repeats the alarm sequence when no one confirmed the alarm
previously. Default is zero minutes.
12.3.4.5 Voice Box
The voice box editor is used to setup the voice box system. This system is pre-config-
ured by Bruker service and does not need to be modified.
Figure 12.29Voice Box Configuration Editor