Bruker BMPC/2, Technical Manual

Page: 83 / 136

83 Z31823_00_05
Troubleshooting
11.7 Turning on the NMR Console After a Power Failure
When the NMR console switches off due to a power failure there are two different ways
to restart it: when the power is restored:
•
Restart the console through the software.
• Restart the console using the mains switch.
11.7.1 Restarting the NMR Console Through the Software
In the menu
Tools
you will find the options
Enable NMR Console
and
Disable NMR Con-
sole
. When you are logged in as Administrator you can use these functions to turn the
NMR console on or off.
Figure 11.6 Restarting the NMR Console Through Software
11.7.2 Restarting the NMR Console Using the Mains Switch
If you cannot switch on the console using the software, you can alternatively use the S4
switch. The S4 switch is found behind the rear cover, roughly in the middle. As soon as
you turn on this switch the KM4 protection will be activated and the console will be provi-
ded with power.
Figure 11.7 Restarting the NMR Console Using the Main Switch
Turn-on the Console
Turn-off the Console
The S4 switch is used
to turn on the
NMR console.