Brovision WH-N5204-P4, User Manual

Page: 5 / 222

User Manual of Network Video Recorder
4
Product Key Features
General

Connectable to network cameras, network dome and encoders.

Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt
ONVIF or PSIA protocol.

Connectable to the smart IP cameras.

PAL/NTSC adaptive video inputs.

Each channel supports dual-stream.

Up to 32 network cameras can be connected for otherWH-N52xx series NVR; 16 network cameras for
WH-N5316-P16 series NVR.

Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.

The quality of the input and output record is configurable.
Local Monitoring

Simultaneous HDMI, VGA and CVBS outputs.

HDMI output and VGA output at up to 1920×1080 resolution.

Multiple screen display in live view is supported, and the display sequence of channels is adjustable.

Live view screen can be switched in group, and manual switch and automatic cycle live view are also
provided, and the interval of automatic cycle can be adjusted.

Quick setting menu is provided for live view.

Motion detection, video tampering, video exception alert and video loss alert functions.

Privacy mask.

Multiple PTZ protocols supported; PTZ preset, patrol and pattern.

Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management

For WH-N5204-P4 series, 1 SATA hard disks can be connected;
For WH-N5208-P8 series, 2 SATA hard disks can be connected;
For WH-N5316-P16 series, 4 SATA hard disks can be connected;
For other WH-N5xxx series up to 8 SATA hard disk can be connected;

Each disk with a maximum of 4TB storage capacity.

8 network disks (8 NAS disks, or 7 NAS disks+1 IP SAN disk) can be connected.

Support eSATA disks for recording or backup.

Support S.M.A.R.T. and bad sector detection.

HDD group management.

Support HDD standby function.

HDD property: redundancy, read-only, read/write (R/W).

HDD quota management; different capacity can be assigned to different channel.

Hot-swappable HDD supporting RAID0, RAID1, RAID5 and RAID10 storage scheme. And 8 virtual
disks can be configured. (Only for the RAID series NVR.)

Support disk clone to the eSATA disk.
Recording, Capture and Playback

Holiday recording schedule configuration.

Continuous and event video recording parameters.

Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm.

8 recording time periods with separated recording types.

Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule