Brovision WH-N5204-P4 User Manual Download Page 151

Page: 151 / 222

User Manual of Network Video Recorder

150

In the NVR Domain Name text field, enter the domain obtained from the NO-IP website

(www.no-ip.com).

Enter the

User Name

and

Password

registered in the NO-IP website.

Figure 9. 8

NO-IP Settings Interface

•

SIMPLEDDNS:

The

Server Address

of the SIMPLEDDNS server appears by default:

www.simpleddns.com

Enter the

Device Domain Name.

You can use the alias you registered in the SIMPLEDDNS server

or define a new device domain name. If a new alias of the device domain name is defined in the

NVR, it will replace the old one registered on the server. You can register the alias of the device

domain name in the SIMPLEDDNS server first and then enter the alias to the

Device Domain

Name

in the NVR; you can also enter the domain name directly on the NVR to create a new one.

Figure 9. 9

SIMPLEDDNS Settings Interface

Register the device on the SIMPLEDDNS server.

Go to the SIMPLEDDNS website: www.simpleddns.com.

Click

to register an account if you do not have one and use the account to log

in.

Figure 9. 10

In the Device Management interface, click

to register the device.

Summary of Contents for WH-N5204-P4































































































































































































































Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands

Brovision WH-N5204-P4, User Manual

Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands