Brovision WH-N5204-P4 User Manual Download Page 33

Page: 33 / 222

User Manual of Network Video Recorder

Figure 2. 15

Selecting Multiple Channels

2.3.2

Editing the Connected IP Cameras and Configuring

Customized Protocols

After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the

basic setting of the IP cameras.

Steps:

Click the

icon to edit the parameters; you can edit the IP address, protocol and other parameters.

Figure 2. 16

Edit the Parameters

Channel Port:

If the connected device is an encoding device with multiple channels, you can choose the

channel to connect by selecting the channel port No. in the dropdown list.

Transfer Protocol:

Auto, TCP and UDP are selectable; you can select the transfer protocol according to the

network condition.

Click

to save the settings and exit the editing interface.

To edit advanced parameters:

Steps:

Drag the horizontal scroll bar to the right side and click the

icon.

Summary of Contents for WH-N5204-P4































































































































































































































Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands

Brovision WH-N5204-P4, User Manual

Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands