Brovision WH-N5204-P4 User Manual Download Page 166

Page: 166 / 222

User Manual of Network Video Recorder

165

9.4

Configuring Network Detection

Purpose:

You can obtain network connecting status of NVR through the network detection function, including network

delay, packet loss, etc.

9.4.1

Testing Network Delay and Packet Loss

Steps:

Enter the Network Traffic interface.

Menu >Maintenance>Net Detect

Click the

Network Detection

tab to enter the Network Detection menu, as shown in Figure 9. 37.

Figure 9. 37

Network Detection Interface

Enter the destination address in the text field of

Destination Address

Click

Test

button to start testing network delay and packet loss. The testing result pops up on the window. If

the testing is failed, the error message box will pop up as well. Refer to Figure 9. 38.

Figure 9. 38

Testing Result of Network Delay and Packet Loss

9.4.2

Exporting Network Packet

Purpose:

By connecting the NVR to network, the captured network data packet can be exported to USB-flash disk,

SATA/eSATA, DVD-R/W and other local backup devices.

Steps:

Enter the Network Traffic interface.

Menu >Maintenance>Net Detect

Click the

Network Detection

tab to enter the Network Detection interface.

Select the backup device from the dropdown list of Device Name, as shown in Figure 9. 39.

Summary of Contents for WH-N5204-P4































































































































































































































Search results

Summary of Contents for WH-N5204-P4

Reviews:

Related manuals for WH-N5204-P4

Brands by name

Popular brands

Brovision WH-N5204-P4, User Manual

Search results

Summary of Contents for WH-N5204-P4

Reviews:

Related manuals for WH-N5204-P4

Brands by name

Popular brands