Brovision WH-N5204-P4 User Manual Download Page 150

Page: 150 / 222

User Manual of Network Video Recorder

149

Figure 9. 4

DDNS Settings Interface

Check the

DDNS

checkbox to enable this feature.

Select

DDNS Type

. Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP and

SIMPLEDDNS.

•

IPServer:

Enter

Server Address

for IPServer.

Figure 9. 5

IPServer Settings Interface

•

DynDNS:

Enter

Server Address

for DynDNS (i.e. members.dyndns.org).

In the NVR Domain Name text field, enter the domain obtained from the DynDNS website.

Enter the

User Name

and

Password

registered in the DynDNS website.

Figure 9. 6

DynDNS Settings Interface

•

PeanutHull:

Enter the

User Name

and

Password

obtained from the PeanutHull website.

Figure 9. 7

PeanutHull Settings Interface

•

NO-IP:

Enter the account information in the corresponding fields. Refer to the DynDNS settings.

Enter

Server Address

for NO-IP.

Summary of Contents for WH-N5204-P4































































































































































































































Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands

Brovision WH-N5204-P4, User Manual

Search results

Summary of Contents for WH-N5204-P4

Reviews:

Brands by name

Popular brands