CONTROLS
Pallet Dispenser
Screen 1.
•
When the Pallet is ‘full’ and
‘Pallet Full’
is displayed
on the screen, press the ‘
Right
’
Arrow ‘A’ (Pallet
Down),
and hold down until the pallet is completely
‘down’
.
•
Move the Harvester forward, for two more cuts,
then stop the Harvester forward travel and press
Pad ‘1 ‘STOP’.
SCREEN 1.
Screen 2.
•
Press
Pad ‘7’
(
Insert Pallet).
The pallet dispensing
sequence will start.
When the pallet has been dispensed onto the pallet
forks, press
Pad ‘1’ (start).
The display will return
to Screen 1.
•
Press
Pad
‘
2
’
(empty pallet)
to raise the forks back
to the stacking position.
CAUTION
If seven rolls are on the Index Conveyor, the ‘FULL PALLET’
SCREEN 2.
must first be raised to the top position,
using the Pallet
‘UP’ Arrow, or change the Index Conveyor number to lower
than seven,
before pressing ‘EMPTY PALLET’
.
Failure to do so will cause the Robotic Arm to start stacking
while the Forks are moving ‘UP’.
The hydraulic system will not respond fully in this case.
2-09
Summary of Contents for RoboMax
