MAINTENANCE
Conveyor Lift Safety Lock.
WARNING
To prevent possible serious injury the Conveyor
Lift Cylinder Lock
must be in place
when working
on the Cutter Head in the raised position.
CAUTION
To prevent possible damage to the machine, when
the Cutter Head is raised for transport, the Conveyor
Cylinder Lift Cylinder Lock must be in place.
The Safety Lock ‘
A
’ is installed to prevent the Lift
Cylinder retracting, from accidental operation, or from
loss of hydraulic pressure.
Raise the Conveyor ‘fully’ to fit the Cylinder Lock
into place.
Cutter Drive – V-Belt. Remove/Install.
•
Raise the Cutter Head and place the Cylinder
Lock ‘
A
’ in position.
•
Loosen the Drive Motor Mounting Bolts ‘
B
’,
and the Drive Belt Tension Adjuster ‘
C
’.
Push the Motor ‘
down’
to slacken the Drive
Belt.
•
Remove the Drive Motor Housing Cover,
and remove the Belt from the Sheave ‘
D
’
•
Remove the Cutter Arm Cover ‘
E
’, to access
the Connecting Rod.
4-06
Summary of Contents for RoboMax
