Brouwer RoboMax, Operator'S Manual

Page: 26 / 84

CONTROLS
Inactive Stacking Screen
The Inactive Stacking Screen is displayed during
Initial Start-up.
IMPORTANT
Do not
press any control panel pads until the
Active Stacking Screen is displayed.
The Inactive Stacking Screen will also be displayed
when the stacking sequence is stopped.
•
Press Pad ‘ 1 ’, ( start ) to display the
Active Stacking Screen.
•
Press Pad ‘ 2 ’ (move manually) to display
the Move Manually Screen.
•
Press, and hold for three seconds, Pad ‘ 3 ’
(reset pallet counter) to reset the pallet counter
to zero.
•
Press Pad ‘ 4 ’ ( empty pallet ) to indicate
a new pallet. An ‘empty pallet’ will be display-
ed and the pallet roll quantity is reset to zero.
(The forks will not move in ‘Inactive Screen’).
•
Press Pad ‘ 8 ’ (roll adv.) to advance the
Index Conveyor one position.
•
Press the ‘UP’ Arrow Pad ‘ A ’ ( add ) to incr-
ease the sod roll diameter in increments
of 0.10 inch.
•
Press the ‘DOWN’ Arrow Pad ‘ B ’ ( sub .) to
decrease the sod roll diameter in increments
of 0.10 inch.
•
Press the ‘Right Arrow’ Pad ‘ C ’ ( calib .) to
display the Calibration Screen.
•
Press the ‘OK’ Pad ‘ D ’ (step seq .) to display
the Step Sequence Screen.
2-04