Brother MFC-J6920DW Service Manual Download Page 343

Page: 343 / 365

5-72

Confidential

AMS07

(Printing assurance 5)

Selectors

1: Improvement of the ruled line offset of A3, Ledger, and B4 size paper

Setting

to this selector enables control to improve the ruled line offset and perform

printing in one direction during normal printing on A3, Ledger, and B4 size plain paper.

Selectors

2: Improvement of the ruled line offset of A4 and Letter size paper

Setting

to this selector enables control to improve the ruled line offset and perform

printing in one direction during normal printing on A4 and Letter size plain paper.

Selectors

3: Improvement of the ruled line offset of paper other than A3, Ledger,

B4, A4, and Letter size paper

Setting

to this selector enables control to improve the ruled line offset and perform

printing in one direction during normal printing on plain paper other than A3, Ledger, B4,
A4, and Letter size paper.

Selectors

4: Paper mode exclusively for Brother

Setting

to this selector enables control suitable for the paper exclusively for Brother

to improve printing quality and perform printing.

Note:

To use AMS07, make sure to update the firmware to the latest one.

Selector

No.

Function

Setting and Specifications

Improvement of the ruled line
offset of A3, Ledger, and B4
size paper

0: Enable (default) 1: Disable

Improvement of the ruled line
offset of A4 and Letter size
paper

0: Disable (default) 1: Enable

Improvement of the ruled line
offset of paper other than A3,
Ledger, B4, A4, and Letter size
paper

0: Disable (default) 1: Enable

Paper mode exclusively for
Brother

0: Disable (default) 1: Enable

Not used.

Summary of Contents for MFC-J6920DW














































































































































































































































































































































































Search results

Summary of Contents for MFC-J6920DW

Reviews:

Related manuals for MFC-J6920DW

Brands by name

Popular brands

Brother MFC-J6920DW, Service Manual

Search results

Summary of Contents for MFC-J6920DW

Reviews:

Related manuals for MFC-J6920DW

Brands by name

Popular brands