Brother MFC-J6920DW Service Manual Download Page 281

Page: 281 / 365

5-10

Confidential

1.3.3 Printout of Scanning Compensation White/Black Level Data

(Maintenance mode 05)

< Function >

This function prints out the light and dark level data for scanning compensation.

< Operating Procedure >
Note:

Perform this procedure after carrying out document scanning operation at least

once, not immediately after powering ON the machine. Do not start this

procedure without carrying out document scanning operation. This is because at

the start of scanning operation, the machine initializes light and dark level data

and takes in the scanning compensation reference data.
The print result differs depending upon whether color or monochrome scanning

is performed preceding this procedure. Check the light and dark level data to be

output before performing this procedure.

Simplex scanning models

(1) For monochrome scanning, make a monochrome copy; for color scanning, make a

color copy.

(2) Press the

and

keys in this order in the initial stage of the maintenance mode.

The "DUMP 0:GRA 1:ALL" appears on the LCD.

(3) To print only the light and dark data graph for each color, LED data, AFE

parameters and background color compensation data, press the

key. To print all

data, press the

key.

If no error has occurred in the machine, the machine displays "PRINTING" on the

LCD and starts printing.
If any error has occurred in the machine, "ME STATE STOP" appears on the LCD.

Note:

If no recording paper is loaded in the paper tray, printing will be canceled.

(4) Upon completion of printing, the machine returns to the initial stage of the

maintenance mode.

Duplex scanning models

(1) For monochrome scanning, make a monochrome copy; for color scanning, make a

color copy.

(2) Press the

and

keys in this order in the initial stage of the maintenance mode.

The "CIS 0:FB 1:ADF" appears on the LCD.

(3) To print data scanned by the first side scanning CIS, press the

key; to print data

scanned by the second side scanning CIS, press the

key.

The "DUMP 0:GRA 1:ALL" appears on the LCD.

(4) To print only the light and dark data graph for each color, LED data, AFE

parameters and background color compensation data, press the

key. To print all

data, press the

key.

If no error has occurred in the machine, the machine displays "PRINTING" on the

LCD and starts printing.
If any error has occurred in the machine, "ME STATE STOP" appears on the LCD.

Note:

If no recording paper is loaded in the paper tray, printing will be canceled.

(5) Upon completion of printing, the machine returns to the initial stage of the

maintenance mode.

Summary of Contents for MFC-J6920DW














































































































































































































































































































































































Search results

Summary of Contents for MFC-J6920DW

Reviews:

Related manuals for MFC-J6920DW

Brands by name

Popular brands

Brother MFC-J6920DW, Service Manual

Search results

Summary of Contents for MFC-J6920DW

Reviews:

Related manuals for MFC-J6920DW

Brands by name

Popular brands