Brother HL-J6000DW, Online User'S Manual

Page: 31 / 373

Home > Paper Handling > Load Paper > Load Paper in Paper Tray #1 / Paper Tray #2 / Paper Tray
#3 > Load A3, Ledger, or Legal Size Paper in Paper Tray #1 / Paper Tray #2 / Paper Tray #3
Load A3, Ledger, or Legal Size Paper in Paper Tray #1 / Paper Tray #2 /
Paper Tray #3
• If the
[Check Paper]
setting is set to
[On]
and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper type and paper size.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the machine or printer driver.
• You can use only plain paper in Tray #2. (HL-J6000DW)
• You can use only plain paper in Tray #2 and Tray #3. (HL-J6100DW)
These instructions describe how to load paper in Tray #1.
•
(HL-J6000DW) The steps for Tray #2 are very similar.
• (HL-J6100DW) The steps for Tray #2 and Tray #3 are very similar.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2
1
2. Pull the paper tray completely out of the machine as shown by the arrow.
When you load paper in Tray #2 or Tray #3 (HL-J6100DW), remove the tray top cover (1).
1
3. Rest the tray on a flat surface.
Push the green slider to the left and then extend the tray until it locks into place.
26