manualshive.com logo in svg

Brother HL-5580D, Service Manual

Share
Download
Brother HL-5580D Service Manual Download Page 392

5-43

Confidential

1.3.19 Check main fan operation (function code: 78)

<Function>

This function is used to check that the main fan is operating normally. Switch the setting 
among rotation speed 100%, 50%, and OFF. 

<Operating Procedure>

LCD

Name

Description

F

Main fan

Emits the heat in the fuser unit.

Non touch panel models

(1) Press the [

▲

] or [

▼

] key in the initial 

state of maintenance mode to display 
"MAINTENANCE 78" on the LCD, and 
press the [OK] key. "F100" is 
displayed on the LCD and the main 
fan rotates at 100% speed.

(2) By pressing the [Go] key, "F50" is 

displayed on the LCD and the main 
fan rotates at 50% speed.

(3) By pressing the [Go] key again, "F 0" 

is displayed on the LCD and the main 
fan stops.

(4) Press the [X] key, and the machine 

returns to the initial state of 
maintenance mode.

Touch panel models

(1) Press the [7], and then the [8] key in 

the initial state of maintenance mode. 
"F100" is displayed on the LCD and 
the main fan rotates at 100% speed.

(2) By pressing the [Mono] key, "F50" is 

displayed on the LCD and the main 
fan rotates at 50% speed.

(3) By pressing the [Mono] key, "F 0" is 

displayed on the LCD and the main 
fan stops.

(4) When you press the [X] key, this 

operation is finished and the machine 
returns to the initial state of 
maintenance mode.

Summary of Contents for HL-5580D


















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands