manualshive.com logo in svg

Brother DCP-110C, Service Manual

Share
Download
Brother DCP-110C Service Manual Download Page 96

 3-8 

Confidential

 

3.2.2 Printing Mechanism 

3.2.2.1  Paper pulling-in, registration, feeding and ejecting mechanisms 

These mechanisms are driven by a single paper feed motor located at the left of the engine unit via 

a gear train. (See the illustration on the next page.) 
The following illustration is a cross-sectional view of the machine viewed from the right. Place the 

recording paper 

face down

 in the recording paper tray. This paper first proceeds to the rear, bends 

upward, heads back toward the front panel, passes under the head/carriage unit for printing, and 

finally enters the eject tray on top of the recording paper tray. 

 

 

 

 

 

 

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands