Brother DCP-110C Service Manual Download Page 302

Page: 302 / 466

8-44

Confidential

8.5.19 Moving Head / Carriage Unit when paper jam occurs

(Function code 75)

Function

When paper jam occurs at the maintenance unit, move the head carriage to the center in order to

remove the recording paper easily.

Operating Procedure

(1) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C
Press

the

and

keys in this order in the initial stage of the maintenance mode.

The head / carriage unit is to be moved to the center of the machine, “PLS OPEN COVER”

displays on the LCD.

DCP315CN/310CN/120C/117C/115C/110C

Enter 7 and 5 in the initial stage of the maintenance mode by using key and

Set

keys.*

(*To enter a numerical code on models having no numerical keypad, press the key several times to

display the numerical code to be entered and then press the

Set

key. Repeat this operation for each

numerical code.)

The head / carriage unit is to be moved to the center of the machine, “PLS OPEN COVER”

displays on the LCD.

(2) Open the cover of scanner unit
“PLS CLOSE COVER” displays on the LCD. Remove the paper jam.
(3) Close the cover of scanner unit.

The head /Carriage is to be moved back to the home position. Machine is return to the initial

stage of the maintenance mode.

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands

Brother DCP-110C, Service Manual

Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands