Brother DCP-110C Service Manual Download Page 305

Page: 305 / 466

8-47

Confidential

(Note 2) This machine counts all purge operations performed since produced in order to prevent the ink

absorber box from overflowing with drained ink. An initial purge, for example, advances the

counter by 187 + 420 = 607. When the counter approaches 6400, "MACHINE ERROR 46"

appears, and further purge operations are prohibited. Replace the ink absorber box and reset

the purge counter with the following procedure.

This machine counts all flushing operation performed since produce in order to prevent the ink

absorber box from overflowing with drained ink. Replace the flushing case when the counter

approaches 434027778, and reset the flushing counter with the following procedure.

Either the purge count or the flushing count approaches the number described above, the

"MACHINE ERROR 46" occurs. Check out both purge and flushing counter in function code 80

when "MACHINE ERROR 46" appears, and replace the defective counter then reset the

counter.

Resetting purge counter and flushing counter

MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

1) Press the

Menu/Set

and

Black

Start

keys. Next press the key four times to enter the

maintenance mode.

TIP:

FAX models equipped with numerical keypads can enter the maintenance mode in the

same way as conventional models; that is, by pressing the

Menu/Set

and

keys

in this sequence.

2) Press the

and

keys in this order in the initial stage of the maintenance mode to call up

the machine's log information. (Function code 80. Refer to

Chapter 8, Section 8.5.20.

)

3) Press the

Black

Start

key several times until the purge count or flushing count appears on

the LCD.

4) Press the

, and

keys in this order to reset the purge count or flushing count to zero.

5) Press the

Stop/Exit

key to return to the initial stage of the maintenance mode.

6) Press the

key twice to return to the standby state.

DCP315CN/310CN/120C/117C/115C/110C

1) Press the

Menu

and

Mono

Start

keys. Next press the key four times to make the

machine enter the maintenance mode.

2) Press the key several times to display 8 on the LCD and then press the

Set

key. Again

press the key several times to display 0 and then press the

Set

key

3) Press the

Mono

Start

key several times until the purge count or flushing count appears on

the LCD.

4) Reset the purge count or flushing count to zero by using the and

Set

keys as follows:

Press

the key several times to display 2 on the LCD and then press the

Set

key. In the

same way, enter 7, 8 and 3.

5) Exit from the maintenance mode by using the and

Set

keys as follows:

Press

the key several times to display 9 on the LCD and then press the

Set

key. Again

press the key several times to display 9 and press the

Set

key.

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands

Brother DCP-110C, Service Manual

Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands