Brother DCP-110C Service Manual Download Page 246

Page: 246 / 466

6-24

Confidential

6.3 IF YOU REPLACE THE MAIN PCB

NOTE:

If you replace the main PCB, also replace the ink absorber box. Using the machine without replacing

the ink absorber box for a long period may cause an overflow of drained ink from the ink absorber box,

thereby staining the machine.

[ 1 ] Load the full maintenance program temporarily (MFC210C U.S.A./Canadian models)

Load update programs/data (Other models)

MFC210C U.S.A./Canadian models

Load the full maintenance program temporarily. Refer to

Section 6.2, [ 1 ].

Other models

If the main PCB is replaced with a new one, load the update programs/data onto the flash ROM.

Refer to

Appendix 2, page App. 2-5.

If the main PCB is replaced with the one used for other machines, follow the steps below.

(1) Update the firmware stored in the flash ROM. Refer to

Appendix 2, page App. 2-7.

(2) Reset the purge counter to zero with the following procedure.
MFC620CN/425CN/420CN/410CN/215C/210C

(except U.S.A./Canadian models) and

FAX2440C

1) Press the

and

keys in this order in the initial stage of the maintenance mode.

NOTE:

Make a note of the log information displayed on the LCD on the machine's repair

log sheet as well as leaving a comment that the log information stored in the EEPROM is

different from the actual record.

2) Press the

Black Start

key several times until the purge count appears on the LCD.

3) Press the

, and

keys in this order to reset the purge count to zero.

4) Press the

Stop/Exit

key to return to the initial stage of the maintenance mode.

5) Press the

key twice to exit from the maintenance mode.

DCP315C/310CN/120C/115C/117C/110C

1) Enter 8 and 0 by using the and

Set

keys.*

NOTE:

Make a note of the log information displayed on the LCD on the machine's repair

log sheet as well as leaving a comment that the log information stored in the EEPROM is

different from the actual record.

(*To enter a numerical code on models having no numerical keypad, press the key several times

to display the numerical code to be entered and then press the

Set

key. Repeat this operation for

each numerical code.)

2) Press the

Mono Start

key several times until the purge count appears on the LCD.

3) Enter 2, 7, 8, and 3 by using the and

Set

keys.*

This resets the purge counter to zero.
4) Press the

Stop/Exit

key to return to the initial stage of the maintenance mode.

5) Enter 9 twice by using the and

Set

keys to exit the maintenance mode.*

[ 2 ] Initialize the EEPROM on the main PCB (Function code 01)

Refer to

Chapter 8, Section 8.5.1.

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands

Brother DCP-110C, Service Manual

Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands