manualshive.com logo in svg

Brother DCP-110C, Service Manual

Share
Download
Brother DCP-110C Service Manual Download Page 164

 5-26 

Confidential

 

5.1.7 Upper 

Cover 

(1)  Remove the four screws from the upper cover. 
(2)  Release the five retainers provided on the upper cover and lift up the upper cover. 

 

 
 

Taptite, bind B

M4x12

Upper cover

Lower cover

Retainer

Retainers

Retainer

Retainer

 

 
 

 

 

Reassembling Notes 

•  When mounting the upper cover: 
  Make sure that the head/carriage unit is placed in the head capping position to prevent the ink 

supply tubes from getting crushed between the upper and lower covers. 

  Take care not to deform the PF encoder disk. 
  Be careful not to pinch the ink absorber box. If pinched, the ink absorber box presses down the 

paper pressure holder (shown on 

page 5-64

), resulting in a paper jam. 

 

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands