manualshive.com logo in svg

Brother DCP-110C, Service Manual

Share
Download
Brother DCP-110C Service Manual Download Page 95

 3-7 

Confidential

 

(1)  ADF scanning: Document moves across stationary CIS unit 

(MFC620CN/425CN/420CN/DCP120C and FAX2440C only)

 

Placing a document 

face down 

in the document tray activates the document front sensor, switching 

to ADF scanning. 
The CIS drive mechanism (details below) operates for each scanning command executed. The CIS 

unit first moves to the white-level reference film for white level compensation and then to the ADF 

scanning position. 
The ADF motor then rotates the document pull-in roller to pull the document into the ADF. This 

new roller has become necessary because this machine has a horizontal document path. The 

document separation roller feeds the pages one at a time,

 starting from the bottom,

 to the document 

feed roller, which rotates to move the page in a curve left, up, and right. The page is scanned as it 

passes over the CIS unit. It then leaves the machine 

face up

 onto the document eject support. The 

machine inserts subsequent pages under this one to preserve the document page order. 
 

(2)  Flat-bed scanning: CIS unit moves under stationary document 

The user lifts the document cover, places a page (or open book) 

face down

 on the glass plate, and 

closes the document cover. 
The CIS drive mechanism (details below) operates for each scanning command executed. The CIS 

unit first moves to the white-level reference film for white level compensation. It then moves right, 

scanning as it goes. It returns to its home position after the scan. 
 

CIS drive mechanism 
The contact image sensor (CIS) unit rides along the CIS rail driven by the CIS drive belt. 

Clockwise motion of the CIS motor moves the unit to the left; counterclockwise motion, to the 

right. This unit consists of the document illumination LED array, the lens array gathering the light 

reflected from the scanned image, and the CIS PCB converting the light input to pixel data output . 

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands