manualshive.com logo in svg

Brother DCP-110C, Service Manual

Share
Download
Brother DCP-110C Service Manual Download Page 194

 5-56 

Confidential

 

5.1.14  Ink Absorber Box 

(1)  Pull out the two tubes (main drain tube and opening tube to the atmospheric air) from the ink 

absorber box. 

 NOTE:

 Pinch the end of the main drain tube with a clip to prevent drained ink from leaking 

and the machine from getting stained with leaked ink. 

NOTE:

 Wrap the end of the opening tube to the atmospheric air in tissue paper to prevent 

drained ink from leaking and the machine from getting stained with leaked ink. 

(2)  Lift the ink absorber box up and out of the lower cover. 
 

NOTE:

 Do not remove the ink absorber box unless it needs to be replaced. When replacing it, 

set a new one immediately to prevent the machine from getting stained with drained ink. 

 NOTE:

 If the ink absorber box or its surroundings are stained with ink, wipe them off with a 

cloth. 

 

 

 

 

 

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands